IT RU ES

Complana 88

ASSEMBLY with glues to standard UNI EN 204-04.

MAIN FRAME profile section 82 x 85 mm with three rabbets, rounded edges.

OPENING SASHES 3-rabbet profile section 88 x 85 mm, with rounded edges, lower crossbar with weep holes at the drip bar, to drain any condensate from the glazing, including the glazing beads.

INSULATION Heat and noise insulation, water and air sealing. Guaranteed by two heat and noise proof gaskets EPDM, welded at the corners, and inserted in the main frame. A third gasket can be inserted in the glazing bead.

DRIP BAR in aluminium with plastic terminals (can be covered in wood). Heat barrier in aluminium and polyamide.

HARDWARE New generation hidden hardware with 13 mm offset, hardware axis shifted towards the inside of the profile to increase the stability of the strike plate fastenings. This system ensures the window has greater resistance to pulling-out and burglary and requires less and simpler maintenance.

air permeability**
UNI EN 1026 (2001)
Class 4 (highest class)

water seal**
class A7

wind resistance**
UNI EN 12211 (2001)

heat transmittance*
UNI EN ISP 10077-1
Uw = 0,83 W/m2 K

* Calculated on single-sash window size 1230 x 1480 mm with glazing
Ug = 0,5 W/m2K

**Calculated on pivoting French windows with two leaves size mm 1830x2924

Drawings and sections