ASSEMBLY with glues to norm UNI EN 204-04.
MAIN FRAME 3-rabbet profiles section 72 x 85 mm with rounded edges.
OPENING SASHES 3-rabbet profiles section 72 x 85 mm with rounded edges, lower crossbar with weep holes at the drip bar, to drain any condensate from the glazing, including the beads.
INSULATION Heat and noise insulation, water and air sealing, guaranteed by two EPDM heat/noise gaskets welded at the corners and inserted in the main frame.
DRIP BAR with heat barrier in aluminium and polyamide, plastic terminals (can be covered in wood).
HARDWARE New generation hardware with 13 mm offset, hardware axis shifted towards the middle of the profile to increase the stability of the strike plate fastenings. This system ensures the window has greater resistance to pulling-out and burglary and that maintenance is simple and reduced.
UNI EN 1026 (2000)
Class 4 (highest class)
UNI EN 1027 (2000)
Class E 1350 (beyond highest class)
UNI EN 12211 (2000)
UNI EN ISP 10077-1 (2007)
Uw = 1,04 W/m2K
*Calculated on a single-sash window size 1230 x 1480 mm with glazing
Ug = 1,1 W/m2K